Studio & Recording / Studio Monitors
M Audio BX5 D3 5-Inch Studio Reference Monitor Speaker- Pair
The BX5 D3 from M-Audio is a 2-way, 100W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 52 Hz to 35 kHz, thanks to two Class A/B amplifiers feeding a 5” Kevlar woofer and 1” silk dome tweeter.A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.
Item In StockThe BX5 D3 from M-Audio is a 2-way, 100W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 52 Hz to 35 kHz, thanks to two Class A/B amplifiers feeding a 5” Kevlar woofer and 1” silk dome tweeter.A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.
- No Reviews Yet.
- Be the first to review this product
Product Information
Why You Need a Monitor
A studio monitor is no ordinary loudspeaker. Unlike a conventional speaker, a true monitor must be unerringly accurate, with a flat frequency response and vanishingly low distortion. It has to tell you, the music producer— dependably and unquestionably—exactly what is or is not in your recording. In a studio-grade monitor speaker, there is no place for the usual list of speaker colorations and limitations prevalent in conventional loudspeakers. Response peaks\dips, uneven polar response, high THD, nasal midrange, bloated mid-bass, and crossover-induced phase incoherence do nothing but undermine the confidence demanded for superior mix performance.
TYPE 2-way near-field studio reference monitors
LOW FREQ. DRIVER 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HIGH FREQ. DRIVER 1 inch (25mm) magnetically shielded natural silk dome
FREQUENCY RESPONSE 52 Hz – 35 kHz
CROSSOVER FREQUENCY 2.5kHz
LOW FREQ. AMPLIFIER POWER 60W
HIGH FREQ. AMPLIFIER POWER 40W
MAXIMUM PEAK SPL 110 dB SPL - Full Bandwidth Pink Noise Measured
INPUT SENSITIVITY -10dBU
INPUT CONNECTORS 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
INPUT IMPEDANCE 10kΩ balanced, 20kΩ unbalanced
POLARITY Positive signal at + input produce outward LF cone displacement
PROTECTION RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
POWER Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W
FUSE 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
CABINET Vinyl-laminated high-acoustic-efficiency MDF
DIMENSIONS(WIDTH X DEPTH X HEIGHT) 6.9” x 7.8” x 10” / 176 x 197 x 254 mm
WEIGHT 12.3 lbs, 5.6kg