Microphones / Condenser Microphones
Lewitt LCT 640 TS Multi Pattern Condensor Microphone
The LCT 640 TS works as a traditional multi-pattern microphone, a stereo microphone, and a mic that can change the polar pattern after the fact with its Dual Output Mode. The 1" true condenser capsule and high-end specifications guarantee precise recordings
The LCT 640 TS works as a traditional multi-pattern microphone, a stereo microphone, and a mic that can change the polar pattern after the fact with its Dual Output Mode. The 1" true condenser capsule and high-end specifications guarantee precise recordings
- No Reviews Yet.
- Be the first to review this product
Product Information
Endless possibilities
It's your Swiss army knife of studio mics.
The LCT 640 TS works as a traditional multi-pattern microphone, a stereo microphone, and a mic that can change the polar pattern after the fact with its Dual Output Mode. The 1" true condenser capsule and high-end specifications guarantee precise recordings.
Whatever you record with the LCT 640 TS will sound incredibly detailed. Your vocals sound larger-than-life, your instruments full and vibrant.
Revolutionary Dual Output Mode
What's the Dual Output Mode?
It changes the way we think about the recording process. To give you more freedom, the LCT 640 TS features a Dual Output Mode. Engage it, and you'll send the front and the back of the capsule's diaphragm to two individual outputs.
This allows for stereo recording and changing the polar pattern after the fact.
Do this in your DAW with our POLARIZER plugin. Sounds complicated? It isn’t!
Stereo capabilities
Perfectly-in-phase stereo recording, with a single mic.
You can use a single LCT 640 TS to record in stereo by switching to Dual Output Mode.
Just point the mic sideways to the source and adapt the stereo width in the mix.
Specifications
Type : Condenser, externally polarized
Acoustical operating principle : Pressure gradient transducer
Diaphragm : 3 micron gold sputtered Mylar
Transducer Ø : 25.4 mm, 1 in
Polar pattern (Dual Output Mode) : Create any polar pattern in post-production
Polar pattern (Multi-Pattern Mode) ; omni, wide cardioid, cardioid, supercardioid, figure-8
Sensitivity : 31.4 mV/Pa, -30.1 dBV/Pa (cardioid)
30.3 mV/Pa, -30.3 dBV/Pa (omni)
34.1 mV/Pa, -29.4 dBV/Pa (figure-8)
Equivalent noise level : 10 dB (A), cardioid
Max. SPL for 0.5 % THD : 134 dBSPL, 0 dB pre-attenuation
Signal / noise ratio ; 84 dB (A)
Dynamic range : 124 dB (A)
Pre-attenuation pad : 0 dB
-6 dB
-12 dB
-18 dB
Low-cut filter : linear
40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
160 Hz (6 dB/oct)
Internal impedance : 110 Ω
Rated load impedance : 1,000 Ω
Supply voltage : 48 V ± 4 V
Current consumption : 5.1 mA
Mic enclosure : Zinc die cast
Connector : Gold plated 3-pin XLR + Mini 3-pin XLR
Microphone dimensions ; 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
Microphone net weight ; 425 g, 14.9 oz